RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050199 RELAY(w/o Side Marker Light) G

LIGHTING (EXT)  RELAY(w/o Side Marker Light)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85916P 1.INSPECT HEADLIGHT RELAY

a.
E269029

Remove the headlight relay from the engine room relay box LH.


b.
E256069N01
2.281,1.146 2.542,1.104 false 2.698,0.708 2.958,0.667 false 2.802,1.219 3,1.115 false 2.635,1.531 2.635,1.375 false 0.281,1.375 0.438,1.573 0.156,0.198 10 1 2.719,1.156 2.948,1.354 0.229,0.198 10 1 1.573,1.375 1.729,1.573 0.156,0.198 10 2 2.563,1.021 2.719,1.219 0.156,0.198 10 2 1.573,0.76 1.729,0.958 0.156,0.198 10 5 2.604,1.229 2.76,1.427 0.156,0.198 10 5 0.292,0.552 0.448,0.75 0.156,0.198 10 3 2.979,0.583 3.135,0.781 0.156,0.198 10 3

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the headlight relay.



c.

Install the headlight relay to the engine room relay box LH.


Hide 85926 2.INSPECT HEADLIGHT DIMMER RELAY

a.
E269028

Remove the headlight dimmer relay from the engine room relay box LH.


b.
E256069N01
2.281,1.146 2.542,1.104 false 2.698,0.708 2.958,0.667 false 2.802,1.219 3,1.115 false 2.635,1.531 2.635,1.375 false 0.281,1.375 0.438,1.573 0.156,0.198 10 1 2.719,1.156 2.948,1.354 0.229,0.198 10 1 1.573,1.375 1.729,1.573 0.156,0.198 10 2 2.563,1.021 2.719,1.219 0.156,0.198 10 2 1.573,0.76 1.729,0.958 0.156,0.198 10 5 2.604,1.229 2.76,1.427 0.156,0.198 10 5 0.292,0.552 0.448,0.75 0.156,0.198 10 3 2.979,0.583 3.135,0.781 0.156,0.198 10 3

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the headlight dimmer relay.



c.

Install the headlight dimmer relay to the engine room relay box LH.


Hide 85916D 3.INSPECT FOG LIGHT RELAY (w/ Fog Light)

a.
E269031

Remove the fog light relay from the engine room relay box RH.


b.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the fog light relay.



c.

Install the fog light relay to the engine room relay box RH.


Hide 82642A 4.INSPECT RUNNING LIGHT RELAY (w/ Daytime Running Light)

a.
E269030

Remove the running light relay from the engine room relay box RH.


b.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the running light relay.



c.

Install the running light relay to the engine room relay box RH.


Hide 85916L 5.INSPECT REAR FOG LIGHT RELAY (for LHD)

a.

Remove the combination meter assembly.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


b.
E269032

Remove the rear fog light relay.


c.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the rear fog light relay.



d.

Install the rear fog light relay.


e.

Install the combination meter assembly.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>INSTALLATION


Hide 85916L 6.INSPECT REAR FOG LIGHT RELAY (for RHD)

a.

Remove the combination meter assembly.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


b.
E269033

Remove the rear fog light relay.


c.
E256070N01
2.281,1.417 2.583,1.323 false 2.813,1.479 3.01,1.438 false 2.792,1.125 2.667,1 false 2.906,0.792 2.667,0.656 false 0.281,1.396 0.438,1.594 0.156,0.198 10 false 1 1.573,1.396 1.729,1.594 0.156,0.198 10 false 2 0.292,0.677 0.448,0.875 0.156,0.198 10 false 3 1.583,0.896 1.74,1.094 0.156,0.198 10 false 5 2.948,0.75 3.104,0.948 0.156,0.198 10 false 3 2.844,1.104 3,1.302 0.156,0.198 10 false 5 2.729,1.427 2.885,1.625 0.156,0.198 10 false 1 2.635,1.229 2.792,1.427 0.156,0.198 10 false 2

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the rear fog light relay.



d.

Install the rear fog light relay.


e.

Install the combination meter assembly.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>INSTALLATION